Description
- Automatically dissolves tombac, copper, zinc and lead greases in the barrel
- Neutral to steel, nickel and chrome
- Improves shot precision when bullet lubrication was the cause
- Supports the removal of MoS2 films from coating residues
Proven and unsurpassed even in tough military use!
The better is the enemy of the good! Therefore Robla Solo was further developed and replaced by Robla Solo MIL. Due to the excellent test results of the Wehrwissenschaftliches Institut der Bundeswehr, Robla Solo MIL is now even used by special troops.
Robla Solo MIL consists of a special combination with ammonia. This not only dissolves the grease from copper, tombac and zinc, but also lead, the enemy no. 1 for the precision of the weapon. Steel, chrome and nickel are not attacked by Robla Solo MIL.
Application: For metal deposits, insert Robla Solo MIL into the barrel closed on one side with a cork or rubber stopper (available e.g. in pharmacies or household goods shops) and allow to act for several hours, preferably overnight in case of extreme smearing. Always fill the barrel to the brim. With less smearing, it is sufficient to pull through Robla Solo MIL soaked tow several times, such as Sucol / Sucolin from BALLISTOL-KLEVER, or Ballistol felt plugs.
Never leave the barrel for a long time if it is only moistened with Robla Solo MIL. Ammonia will evaporate, the remaining water in combination with organic salts can cause pitting corrosion. The barrel completely filled with Robla Solo MIL can be stored safely overnight.
Green to blue colour indicates dissolved copper and tombac, lead and zinc go colourless into solution.
Then dry the barrel several times and spray with BALLISTOL or Gunex. After the dry drawing through, the barrel must be oiled, as otherwise pitting corrosion can occur in the inner surface of the barrel.
Hazard and safety information
Danger: *}
May be corrosive to metals. Causes severe skin burns and eye damage. May irritate respiratory tract. Keep out of the reach of children. In case of contact with eyes: Rinse gently with water for several minutes. Remove existing contact lenses if possible. Continue rinsing. Keep under lock and key. Contents / container to be recycled.
hazard statements
H290 May be corrosive to metals.
H314 Causes severe skin burns and eye damage.
H318 Causes serious eye damage.
H335 May cause respiratory irritation.
Characteristics
| Weight: |
